High Mast Poles
Manufacturer in Kolkata
Galvanized high mast lighting poles for highways, ports, warehouses, temples and large open areas, made in West Bengal and installed across India.

One Tall Mast
Lights a Wide Area
Subham Poles Projects Pvt. Ltd. is a high mast pole manufacturer in Kolkata. We make and install high mast lighting poles that light large open areas from a single point: highway junctions, ports, warehouses, mines, sports grounds and temple grounds.
A high mast carries a ring of floodlights well above the ground. One mast can replace many ordinary street light poles, which means fewer foundations, less clutter on the ground and even light across the whole area.
Our high mast lighting poles are hot-dip galvanized for long outdoor life, and come with a lantern carriage that lowers to the ground for maintenance. They are installed in West Bengal, Odisha, Arunachal Pradesh and Rajasthan, including the Jagannath Mandir in Digha.
- UseLarge-area lighting
- FinishHot-dip galvanized
- MaintenanceLowering lantern carriage
- ServiceSupply and installation
Parts of a
High Mast Lighting System
A high mast is more than a tall pole. These are the parts that work together to light the area and keep maintenance simple.
Mast Shaft
A tapered, polygonal steel shaft built in sections and joined on site to the full height.
Lantern Carriage
A ring at the top that holds the floodlights, aimed to spread light evenly around the mast.
Winch and Wire Ropes
Raise and lower the lantern carriage, so lamps are serviced at ground level.
Base and Foundation
A base plate on foundation bolts, with a door at the base for the winch and electrical connections.
High Mast Pole
Specifications
Every mast is designed for its height, number of lights, wind conditions and site.
| Shaft | Polygonal, tapered steel shaft in sections |
|---|---|
| Height | To your lighting design; common heights include 12.5, 16, 20, 25 and 30 metres |
| Finish | Hot-dip galvanized inside and out |
| Lantern carriage | Ring type, sized for the number of floodlights specified |
| Raising and lowering | Winch with wire ropes for lowering the lights to ground level |
| Base | Base plate with foundation bolts, and a service door at the base |
| Scope | Supply only, or supply and installation |
Send us the height, number of lights, site location and quantity, or your tender specification, for an exact quotation.
High Mast Lighting
We Have Installed
A selection of our high mast projects in four states.
Jagannath Mandir
High mast lighting across the temple grounds, positioned to keep the view of the temple clear.
Delhivery Warehouse
Area lighting high masts for brighter, safer yard operations at the warehouse.
Tezu
A high mast lighting pole improving visibility and safety in the far north-east.
Jaring, Junagarh
High mast lighting for brighter, safer public areas after dark.
Shree Shakti Ked Dham
Weather-resistant high mast poles lighting the large temple grounds.
Ambuja Neotia
High mast poles supplied to light a large area efficiently.
Where High Mast Poles
Are Used
Highway Interchanges
Junctions, flyovers and interchanges, where one mast replaces a cluster of street light poles.
Ports & Shipyards
Container yards and quays, where galvanized masts stand up to salt air.
Airports & Airfields
Aprons, cargo areas and parking bays that need even light over a large area.
Industrial Complexes
Plant yards, storage areas and factory premises that operate through the night.
Open-Cast Mines
Haul roads, benches and processing areas for safe night-shift work.
Logistics & Container Yards
Warehouses and freight yards, like the Delhivery warehouse we lit in West Bengal.
Toll Plazas & Border Posts
Toll lanes, checkpoints and weigh stations that need shadow-free light.
Sports & Recreation Areas
Sports grounds, parks and temple grounds, like the Jagannath Mandir in Digha.
Why Choose Us for
High Mast Lighting
Manufacture and Install
One company from fabrication to erection, so there is one point of responsibility.
Proven in Tough Sites
From the Bay of Bengal coast at Digha to remote Tezu in Arunachal Pradesh.
Made to Your Design
Height, number of lights and fittings built to your lighting layout or tender.
Direct from Kolkata
Made at our own units in West Bengal and dispatched to sites across India.
High Mast Pole
Questions
Common questions from buyers about high mast lighting.
What is a high mast pole?
A high mast is a tall steel pole that carries a ring of floodlights at the top to light a large area from one point. It is used at highway junctions, ports, airports, industrial yards, stadiums and other wide open spaces.
What heights do high mast poles come in?
Common high mast heights in India include 12.5, 16, 20, 25 and 30 metres. We manufacture each mast to the height and number of lights your lighting design requires.
How are the lights on a high mast maintained?
The floodlights sit on a lantern carriage that is lowered to the ground by a winch and wire ropes. Lamps can be cleaned or replaced at ground level without a crane or climbing the mast.
Are your high mast poles galvanized?
Yes. Our high masts are hot-dip galvanized inside and out, which protects them in rain, humidity, industrial fumes and coastal air.
Do you supply and install high mast lighting?
Yes. We manufacture high masts and also install them, as at the Jagannath Mandir in Digha, Tezu in Arunachal Pradesh and Kalahandi in Odisha.
Do you supply high mast poles outside West Bengal?
Yes. Our high masts are installed in West Bengal, Odisha, Arunachal Pradesh and Rajasthan, and we supply projects across India.
You May Also Need
Planning High Mast Lighting?
Get a Quote from the Manufacturer
Send the area to be lit, mast height, number of lights and site location, and our team will reply with a quotation.