MS Steel Tubular Poles
Manufacturer in Kolkata
Swaged mild steel tubular poles for street lighting and power lines, made to IS 2713 at our units in West Bengal and supplied across India.
Swaged MS Poles
Built to IS 2713
Subham Poles Projects Pvt. Ltd. is a steel tubular pole manufacturer in Kolkata. Our MS steel tubular poles are made from mild steel tubes of different diameters, joined by swaging so the pole steps down in size from the base to the top. The result is a strong, straight pole that carries street lights and overhead lines with a slim profile.
We manufacture swaged tubular poles to IS 2713, in the designation, height and wall thickness given in your tender or drawing. Each MS pole is supplied with a primer and paint finish, ready for installation.
Our poles are used by electricity distribution companies, municipalities, contractors and private developers for street lighting, road lighting and power distribution in Kolkata, across West Bengal and in projects throughout India.
Need a longer outdoor life with less maintenance? See our GI steel tubular poles, which have the same structure with a hot-dip galvanized finish.
- TypeSwaged steel tubular pole
- StandardIS 2713
- FinishPrimer and paint (MS)
- SupplyAcross India
MS Tubular Pole
Specifications
Every order is made to the project's specification. These are the options we manufacture.
| Pole type | Swaged steel tubular pole, in stepped sections of reducing diameter |
|---|---|
| Standard | IS 2713 (tubular steel poles), or the client's specification |
| Material | Mild steel tubes |
| Length | Up to 16 metres |
| Wall thickness | Up to 8 mm, as per the designation |
| Finish | Primer and paint; powder coating on request. For a galvanized finish see GI tubular poles |
| Installation type | Grouting (planting) type for direct burial in concrete, or foundation type with a base plate |
| Fittings | Single or double arm brackets, base plate, top cap and cross-arm clamps to suit the application |
Pole designations, dimensions and tolerances follow IS 2713 or the tender drawing. Send us your specification for an exact quotation.
MS or GI Tubular Pole:
Which Should You Choose?
Both have the same swaged structure. The difference is how the steel is protected, which decides cost and service life.
| MS (painted) | GI (galvanized) | |
|---|---|---|
| Protection | Primer and paint coating | Hot-dip zinc coating, inside and out |
| Upfront cost | Lower | Higher |
| Maintenance | Periodic repainting | Little or none for many years |
| Best for | Budget-led projects, inland sites, schemes with planned maintenance | Coastal, humid or polluted sites, and long-life public infrastructure |
Kolkata's humidity and monsoon make galvanizing worth considering for long-term outdoor use. See GI tubular poles.
Where MS Tubular Poles
Are Used
Road Lighting
Main roads, highways and access routes, where poles are spaced to the lighting layout of the project.
Street Lighting
Local streets and neighbourhood roads in municipal and panchayat lighting schemes.
Traffic Signal Mounting
Traffic signals and road signs at junctions, with brackets made to suit the signal equipment.
Industrial Estates
Internal roads, yards and boundaries of factories and warehouses.
Parking Areas
Open car parks, vehicle lanes and entry gates.
Commercial Spaces
Office campuses, retail developments and shared outdoor areas.
Parks & Walkways
Footpaths, gardens and lakefronts, where a slim pole suits the landscape.
Residential Townships
Internal roads, entrances and common areas of housing developments.
How We Make
Steel Tubular Poles
Tube Selection and Cutting
Mild steel tubes are checked and cut to the section lengths of the pole designation.
Swaging
The sections are swaged and joined so the pole tapers in steps from base to top.
Fittings and Finish
Base plates, caps and brackets are fitted, and the pole is cleaned, primed and painted.
Inspection and Dispatch
Each pole is checked for length, straightness and finish before dispatch to site.
Why Buy Tubular Poles
From Subham Poles
Direct from the Manufacturer
Made at our own units in West Bengal, with no middlemen between you and the factory.
Made to Your Tender
Designation, height, thickness and fittings as your drawing or specification requires.
Proven on Landmark Projects
Our poles stand at sites from the Statue of Unity in Gujarat to Kolkata Airport. See projects.
Delivered Across India
Dispatch from Kolkata to project sites in West Bengal, Eastern India and beyond.
MS Tubular Pole
Questions
Common questions from buyers about our steel tubular poles.
What is an MS steel tubular pole?
It is a pole made from mild steel tubes of different diameters, joined by swaging so the pole steps down in size from bottom to top. MS poles are supplied with a painted finish and are widely used for street lighting and overhead power lines.
What is the difference between MS and GI tubular poles?
Both have the same structure. An MS pole is protected by primer and paint, while a GI pole is hot-dip galvanized with a zinc coating. GI poles last longer outdoors with less maintenance; MS poles cost less and suit sites where repainting is planned.
Which standard do your steel tubular poles follow?
Our swaged steel tubular poles are made to IS 2713, the Indian Standard for tubular steel poles, in the designation and dimensions given in the tender or drawing.
What heights are available?
We manufacture steel tubular poles up to 16 metres long, in the heights and wall thicknesses each project specifies.
Can the poles be planted directly or bolted to a foundation?
Both. We supply grouting (planting) type poles for direct burial in concrete, and foundation type poles with a base plate for bolting to a prepared foundation.
Do you supply outside Kolkata and West Bengal?
Yes. We manufacture in West Bengal and deliver steel tubular poles to project sites across India.
Need MS Tubular Poles?
Get a Quote from the Manufacturer
Send the designation or height, quantity, finish and delivery location, and our team will reply with a quotation.